Woven Sack Based Roof Insulation Materials

Product Details:

An aluminium film will be placed between the roof tiles and the structure of the roof. This film shall be made of synthetic structure (not paper based) to resist high moisture environment. Its reflective face will be placed up both side and will be of pure aluminium (not metallised) for a radiation reflection higher than 95%.

 

On Open Structures: -

 

Radiant barrier will fixed between the rafters and the battens. Ideally a counter-batten solution should be implemented.

 

On concrete decks: -

 

Radiant barrier will be located between the concrete deck and the roof tiles. It will be maintained by the weight of the roof tiles.

 

Water-proofing: -

 

For an extra waterproofing protection with radiant barriers, the rolls will be laid horizontally, from bottom to top. An overlapping of minimum 20cm should be respected and rolls should be solidarized together with specific aluminium tapes.

 

Usage: -

It is economical solution for a wide range of industrial, manufacturing, packaging and consumer application. Such as for industrial sheds, commercial buildings, home insulation, under wood or laminated flooring, roof insulation, carpet underlay and construction, packaging material to the sensitive products.

Product Details:

Constructions:

• 5 to 7 layer co- extruded composite material made from UV FR reinforced woven fabric with one side Pure reflective aluminium foil other both side special highly reflective metalized film.

Applications:

• Our SunPro®AWM is mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into the house through the roof during the summer and retain indoor heat generated during the winter.
• Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

• Eco-friendly, environment-friendly and radiant barriers.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low-cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, supermarket, gym, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial application and make sure the product can serve the specific application before actually put it to use.

Packaging Details:

• Core ID: 76mm (3inch) Standard
• Length: 250 mtrs, Other lengths available On request
• Thickness tolerance: +/-7% Maximum
• 1220mm- 1520mm

Specifications:

Product Details:

Our SunPro AWA aluminum foil PE fabric insulation is mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into the house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat from contacting machine.

Constructions:

• 5 to 7 layer co- extruded composite material made from UV FR reinforced PP woven fabric with both side highly reflective Aluminium foil

Product Benefits:

• Eco-friendly, environment-friendly and radiant barrier.
• Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer Which improves the performance of the insulating material.
• PE woven fabric provides high tensile strength and durability
• Aluminum foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.
• Lightweight and easy handling and low cost.
• Never use chemical bonding materials.
• PE woven fabric can be sewed, easily installed on big building such a warehouse ceiling, factory building, supermarket, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
• The products should be stored at room temperature away from wet and heat source.
• Please do a trial application and make sure the product can serve the specific application before actually put it to use.

Specifications:

Product Details:

We are offering MWM Radiant Barriers to our clients. 5 to 7 layer co- extruded composite material made from UV & FR reinforced woven fabric with both sidespecial highly reflective metalized film.

Product Details:

Constructions:

• 3 to 5 layer co- extruded composite material made from UV FR reinforced PP woven fabric with one side special highly reflective metalized film.

Applications:

• Our SunProMW insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter.
• Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

• Eco-friendly, environment friendly and radiant barrier.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used, you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• Tolerance Weight and Thickness +-10%; Width +-2mm; Length +-0.5%.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application before actually put it to use.

Specifications

Product Details:

Our SunPro MWPE insulation is mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into the house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine. It is also used inside CFB in packaging for protecting a product from heat.

Constructions

• 3 to 5 layer co- extruded composite material made from UV FR reinforced PP woven fabric with one side special highly reflective metalized film.

Product Benefits

• Eco-friendly, environment-friendly and radiant barrier.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low-cost waterproof type.
• never use chemical bonding materials.
• PE woven fabric is used where you can sew it and easily install it on big building such a
• Warehouse ceiling, factory building, super market, container liner.
• for heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks

• Above data are typical results and not the guaranteed performance.
• Tolerance Weight and Thickness +-10%; Width +-2mm; Length +-0.5%.
• The products should be stored at room temperature away from wet and heat source.
• trial application and make sure the product can serve the specific application before actually put it to use.

Specifications

Product Details:

Constructions

• 3 to 5 layer co- extruded composite material made from UV FR reinforced PP woven fabric with one side highly reflective Aluminium foil.

Applications

• Our SunPro AW aluminum foil PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter.
• Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms.
• It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits

• Eco-friendly, environment friendly and radiant barrier.
• Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material
• PE woven fabric provides high tensile strength and durability
• Aluminum foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.
• Lightweight and easy handling and low cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks

• Above data are typical results and not the guaranteed performance.
• Tolerance Weight and Thickness +-10%; Width +-2mm; Length +-0.5%.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application before actually put it to use.

Specifications

Product Details:

“Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however radiant barriers do not necessarily protect against heat transfer via conduction or convection..”

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: As per Requirement
• Packaging Details: As per Requirement

Product Details:

Perforated SunPro™ Radiant Barrier Perforated radiant barrier reflects heat back at the source instead of absorbing it like traditional fiberglass insulation. As the name states, perforated radiant barrier has tiny perforations that provide breath-ability and moisture vapor to escape. The perforations in perforated radiant barrier prevent condensation buildup making perforatedx radiant barrier foil insulation a great choice for attic insulation.

Product Details:

SunPro™ Radiant Barrier“SunPro™ Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however radiant barriers do not necessarily protect against heat transfer via conduction or convection.."

Perforated Radiant BarrierSunPro™ is a versatile range of high performance Perforated Radiant Barrier forinsulation for roofs, walls and floors. SunPro™ fibre-free flexible Reflective Insulation Materials offers the benefits for your building insulation…

Thermal Insualtion MaterialSunPro™ is Thermal Insulation/Thermal Heat Insulation that was made from the layer of 99% Pure Aluminum foil and Aluminized Metalized Film (The technology that was developed by NASA, USA) to function best as under deck or roof insulation widely used in Building Construction Industries

Product Details:

SunPro™ Radiant Barrier“SunPro™ Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however radiant barriers do not necessarily protect against heat transfer via conduction or convection.."

Perforated Radiant BarrierSunPro™ is a versatile range of high performance Perforated Radiant Barrier forinsulation for roofs, walls and floors. SunPro™ fibre-free flexible Reflective Insulation Materials offers the benefits for your building insulation…

Thermal Insualtion MaterialSunPro™ is Thermal Insulation/Thermal Heat Insulation that was made from the layer of 99% Pure Aluminum foil and Aluminized Metalized Film (The technology that was developed by NASA, USA) to function best as under deck or roof insulation widely used in Building Construction Industries…

Product Details:

Perforated SunPro™ Radiant Barrier Perforated radiant barrier reflects heat back at the source instead of absorbing it like traditional fiberglass insulation. As the name states, perforated radiant barrier has tiny perforations that provide breath-ability and moisture vapor to escape. The perforations in perforated radiant barrier prevent condensation buildup making perforatedx radiant barrier foil insulation a great choice for attic insulation.

Product Details:

Perforated SunPro™ Radiant Barrier Perforated radiant barrier reflects heat back at the source instead of absorbing it like traditional fiberglass insulation. As the name states, perforated radiant barrier has tiny perforations that provide breath-ability and moisture vapor to escape. The perforations in perforated radiant barrier prevent condensation buildup making perforatedx radiant barrier foil insulation a great choice for attic insulation.

Product Details:

Perforated SunPro™ Radiant Barrier Perforated radiant barrier reflects heat back at the source instead of absorbing it like traditional fiberglass insulation. As the name states, perforated radiant barrier has tiny perforations that provide breath-ability and moisture vapor to escape. The perforations in perforated radiant barrier prevent condensation buildup making perforatedx radiant barrier foil insulation a great choice for attic insulation.