Radiant Barriers

Product Details:

Constructions:

• 5 to 7 layer co- extruded composite material made of Fiberglass Reinforced mesh in kraft paper with two sides special highly reflective aluminum foil.

Applications:

• Our SunPro Foil Kraft ( AFKA ) insulation are mainly used as aluminum foil roof insulation, reflective foil wall insulation and also could be applied as finishes onto rock wool, glass wool etc.
• Our product is used as a moisture vapor barrier facing in air conditioning ductworks and cold rooms.
• This flexible thermal insulation sheets also service as energy insulating barrier in aid duct and HVAC system.

Features:

• High reflected rate 97% aluminum foil as outer surface could reflect solar light and block thermal radiant energy
• Kraft as liner made it much stronger than the single layer of pure aluminum foil, could be folded into any shape so as to install easily.

Packaging Details:

• Core ID: 76mm (3inch) Standard
• length: 250 mtrs, Other lengths available on request
• Thickness tolerance: +/-7% Maximum
• 1220mm -1520mm

Specifications:

Product Details:

Constructions:

• 3 to 5 layer co-extruded composite material made from Fibre glass cloth or fabric or Mesh laminated with highly reflective al foil.

Applications:

• Our SunPro® AFG is mainly used in an automobile for pipe insulation, and also in HVAC system, roofs, ceilings, walls, ducts and pipes, basements, water heaters, crawl spaces, and garages in all types of residential, industrial, commercial and agricultural buildings.
• And it works well in areas with cool, warm, hot, and humid climates.

Features:

• 97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.

Packaging Details:

• Core ID: 76mm (3inch) Standard
• length: 250 mtrs, Other lengths available on request
• Thickness tolerance: +/-7% Maximum
• 1220mm and 1520mm

Specifications:

Product Details:

Our SunPro AWKA Aluminum Foil PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Construction:
7 layer co- extruded composite material made from UV & FR reinforced PP woven fabric & ESK Sack Kraft with both side highly reflective Aluminium foil

 

Specification:

• 9 MIC AL FOIL – INSULATION GRADE
• UV & FR PE
• ESK SACK KRAFT
• UV & FR PE
• UV& FR HD WOVEN RAINFORCEMENT
• UV & FR PE
• 9 MIC AL FOIL – INSULATION GRADE

 Typical Physical Property:

Product Details:

Constructions:

• 3 to 5 layer co-ean extruded composite material made from UV FR reinforced PP woven fabric with one side highly reflective Aluminum foil

Applications:

• Our SunPro® AWPE aluminum foil PE fabric insulation is mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter.
• Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms.
• It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

• Eco-friendly, environment-friendly and radiant barriers.
• Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material
• PE woven fabric provides high tensile strength and durability
• Aluminum foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.
• Lightweight and easy handling and low-cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application before actually put it to use.

Packaging Details:

• Core ID: 76mm (3inch) Standard
• length: 250 mtrs, Other lengths available on request
• Thickness tolerance: +/-7% Maximum
• 1220mm - 1520 mm

Specifications:

Product Details:

SunPro Insulation Film For Export Packaging is versatile range of high performance fibre-free flexible reflective insulation for roofs, walls and floors. SunPro fibre-free flexible Insulation Film For Export Packaging offers the following benefits for your building insulation.

Features:

• Based on reflection means low emissivity (blocks heat and moisture)
• Reflects most of radiation heat (blocks 97% of radiation heat)
• Light Weight, no degradation, lasts life long
• Easy and fast installation, No spacers required
• Environment friendly
• No Wire mesh needed, saves time and money

Usage: Metalized film Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Metalized film Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Our Insulation Film For Export Packaging of products include Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil - Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminum Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Metalized film Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging Which Used in Below application.

• Roof Insulation
• Foil Insulation
• Pre Engineered Building Insulation
• Thermal Insulation Materials
• Under Roof Insulation
• Foil Wrap Insulation
• Aluminium Foil Insulation
• Home Insulation
• Metal Building Insulations materials
• Reflective Barrier film
• Reflective Insulation Material
• Heat Insulation Material
• Radient Barrier FOIL
• HVAC Insulation
• Aluminium Foil for Bubble Insulations
• PE coated Aluminium Foil For Foam Insulations
• Metalized Film for Bubble Insulations
• PE coated METPET Film Foil For Foam Insulations
• Coated Metalized BOPP Film For Insulation Manufacturers
• Livestock Insulation Materials
• Farming Insulation
• Poultry Farm Insulation
• Mobile House Insulation
• Building Insulation
• Factory Shed Insulations
• Insulated Foil For Export Packaging
• Fibreglass Insulations

Product Details:

SunPro™ AFT – Foil Mesh Fiberglass Tissue For Phenolic BoardConstruction

• 3 to 5 layer Pure reflective Al foil Laminated with Fiber Glass Mesh Tissue

Application

• Polyurethane &Phenolic Insulation panels for roof and wall
• PIR Insulation panel
• PUR Insulation panel
• Thermal board insulation panel
• Insulation panel or roof
• PUR/PIR Foam Pre-insulated Duct Pane
• Aluminum foil is processed into sandwich panels with foam Board and It’s widely used for central air condition duct/Hybrid ventilation duct, like hospital, supermarket, hotel and more public place. This foil is more and more popular with buyers, as our foil is Green & Environmental protection

Product Details:

SunPro™ Group is a premier source for your converting paper needs.. Does your company use Paper or Paperboard for converting, printing, or packaging? One of our main points of focus at The SunPro™ Group is on convertible paper & paperboard. Whether you call it job lot, stock lot, odd lot, or seconds; chances are good that we have what you need in stock for your urgent requirements, small runs, or cost sensitive jobs that might prohibit placing mill orders

SunPro™ Group is one of the leading manufacturer, exporter and supplier of PE coated paper & paper boards with and without Multi Color Rotogravure Printing option. At present, our products are well accepted by the industries like Pharmaceuticals, Snack Foods, Ice Creams, Dairy Production, Tea, Coffee, Milk, Automobiles, Stationery and other FMGC Industries. Our experienced team of professionals gathered in depth knowledge on extrusion coating printing technology to offer custom made solutions. Our innovative approach helps us to stand out from the competition. The outstanding quality of our products is comparable with overseas brands and is being patented for their exclusivity.

Product Details:

We SunPro™ Group, are striving hard to supply our customers with the best quality plastic Coated & Laminated nonwoven fabrics at very competitive prices. We are your best source for different types of nonwovens used in industrial, hygienic, and medical applications. We are ideally located to serve the Asian markets. Nonwoven roll goods are primarily sold to converters specializing in industrial wipes, wet wipes, baby wipes, medical wipes, food service wipes, oil only wipes, surgical gowns and much more. We have in stock a wide variety of nonwovens at any given time, this helps us to ship the orders on time. Apart from roll goods we have a complete line of industrial wipes, baby wipes, wet wipes, furniture wipes, oil only sorbents which we can also supply on OEM basis. As always shipping is free on full container orders to anywhere in the world. So feel free to contact us for all your nonwoven needs.

Product Details:

M/S, SunPro™ Group has consistently introduced innovative packaging solutions to satisfy the most demanding and quality conscious customers. This Mega Conversion capacity is for the converter community. Being converter's converter we are flexible enough to laminate our customers, own paper/ other substrate on contract manufacturing. We have 3 years experience in job working and a repute to respect the value of the customer’s material.

For finding new product solutions our product development & marketing team is working closely with our customers. Continuous quality control is used to monitor and measure the properties of the products. For direct contact with foodstuff, dry foods & greasy foods, we have US FDA approval for all of the major requirements & recommendation for materials that come into contact with food.

Product Details:

We M/S, SunPro™ Group have about 3 years Inovative experience in polycoated field and we are the very first to introduce multyplay poly coating in Ahmedabad Industrial zone. Also We as manufacturer have around 10 years experience in business with other fields.

We have been offering Poly Coating, Gloss Lamination, Sandwich Lamination, Film Coating and Woven Sack Lamination to our clients at competitive prices and within the defined time frame. To execute these, we have with us state-of-the-art facilities that allow us to undertake and complete various coatings projects, comfortably. Besides, we possess various efficient machines that are specially designed as per the international standards. These machines are capable of effectively handling all the coating tasks

Product Details:

We M/S, SunPro™ Group have about 3 years Inovative experience in polycoated field and we are the very first to introduce multyplay poly coating in Ahmedabad Industrial zone. Also We as manufacturer have around 10 years experience in business with other fields.

We have been offering Poly Coating, Gloss Lamination, Sandwich Lamination, Film Coating and Woven Sack Lamination to our clients at competitive prices and within the defined time frame. To execute these, we have with us state-of-the-art facilities that allow us to undertake and complete various coatings projects, comfortably. Besides, we possess various efficient machines that are specially designed as per the international standards. These machines are capable of effectively handling all the coating tasks

Product Details:

"Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however radiant barriers do not necessarily protect against heat transfer via conduction or convection.."

One of our main products SunPro™ is Thermal Insulation/Thermal Heat Insulation that was made from the layer of 99% Pure Aluminum foil and Aluminized Metalized Film (The technology that was developed by NASA, USA) to function best as under deck or roof insulation widely used in Building Construction Industries. This high reflectivity and low emissivity surface will reflect out mostly 95% of radiant heat from penetrating your home/building/property - One of the most Energy Efficiency (Energy Saving) Green Building Materials, a Sustainable & Affordable Product. (Environment Friendly!)

Product Details:

Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however radiant barriers do not necessarily protect against heat transfer via conduction or convection.."

One of our main products SunPro™ is Thermal Insulation/Thermal Heat Insulation that was made from the layer of 99% Pure Aluminum foil and Aluminized Metalized Film (The technology that was developed by NASA, USA) to function best as under deck or roof insulation widely used in Building Construction Industries. This high reflectivity and low emissivity surface will reflect out mostly 95% of radiant heat from penetrating your home/building/property - One of the most Energy Efficiency (Energy Saving) Green Building Materials, a Sustainable & Affordable Product. (Environment Friendly!)

Product Details:

SunPro Group of companies is ranked amongst the reputed names in the market for offering an extensive range of VCI Aluminium Foil Laminated Film. Besides, we present this series to our clients at nominal prices. VCL barriers  fabric is used for pallet cover and also for export shipment come in different size and gsm as per customer requirement it high moisture barrier help to protect material from sea sour conditons help to reach safely 

Product Details:

Protective barrier film is to protect inside condtions of shed from the outside higher temperture widly used for roof barrier insulation  it is customise as per requirement it is long lasting for ten years and more

Product Details:

We M/S, SunPro™ Group have about 3 years Inovative experience in polycoated field and we are the very first to introduce multyplay poly coating in Ahmedabad Industrial zone. Also We as manufacturer have around 10 years experience in business with other fields.

We have been offering Poly Coating, Gloss Lamination, Sandwich Lamination, Film Coating and Woven Sack Lamination to our clients at competitive prices and within the defined time frame. To execute these, we have with us state-of-the-art facilities that allow us to undertake and complete various coatings projects, comfortably. Besides, we possess various efficient machines that are specially designed as per the international standards. These machines are capable of effectively handling all the coating tasks

Product Details:

Fibreglass Mesh Laminated Film⁄ Foils

like Light Weight Fiberglass Mesh Backed Foil Insulation Finish is Reflects most of radiation heat (blocks 97% of radiation heat)

Fibreglass Mesh Laminated Metalized Film

Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminum foil or film as outer side, this foil mesh insulation jacketing SunPro™ offers usually be installed for pipe insulation in automobile and so does to wall and roof insulation.

Product Details:

We SunPro™ Group, are striving hard to supply our customers with the best quality plastic Coated & Laminated nonwoven fabrics at very competitive prices. We are your best source for different types of nonwovens used in industrial, hygienic, and medical applications. We are ideally located to serve the Asian markets. Nonwoven roll goods are primarily sold to converters specializing in industrial wipes, wet wipes, baby wipes, medical wipes, food service wipes, oil only wipes, surgical gowns and much more. We have in stock a wide variety of nonwovens at any given time, this helps us to ship the orders on time. Apart from roll goods we have a complete line of industrial wipes, baby wipes, wet wipes, furniture wipes, oil only sorbents which we can also supply on OEM basis. As always shipping is free on full container orders to anywhere in the world. So feel free to contact us for all your nonwoven needs.

Product Details:

SunPro™ Radiant Barrier“SunPro™ Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however radiant barriers do not necessarily protect against heat transfer via conduction or convection.."

Perforated Radiant BarrierSunPro™ is a versatile range of high performance Perforated Radiant Barrier forinsulation for roofs, walls and floors. SunPro™ fibre-free flexible Reflective Insulation Materials offers the benefits for your building insulation…

Thermal Insualtion MaterialSunPro™ is Thermal Insulation/Thermal Heat Insulation that was made from the layer of 99% Pure Aluminum foil and Aluminized Metalized Film (The technology that was developed by NASA, USA) to function best as under deck or roof insulation widely used in Building Construction Industries

Product Details:

“SunPro™ Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however radiant barriers do not necessarily protect against heat transfer via conduction or convection
SunPro™ is Thermal Insulation/Thermal Heat Insulation that was made from the layer of 99% Pure Aluminum foil and Aluminized Metalized Film (The technology that was developed by NASA, USA) to function best as under deck or roof insulation widely used in Building Construction Industries

Product Details:

At SunPro™, we offer a wide-ranging range of Industrial PE Laminated Aluminium Foil and Aluminium Foil Laminated Materials,, which is widely insisted by many industries and printing company owing to their greater quality as below.
PolyFilm Laminated Al Foil Application:PE Aluminium Foil For Air Bubble InsulationsPE Coated Foil for Foam Insulations Materials ManufacturingPoly Coated Al foil For Heat Lamination with FoamExtruded PE Coated Al foil For Heat Lamination with Air Bubble FilmPE coated Pure Foil For Glass Wool InsulationsPE coated Al foil For Thermal Insulations MaterialsPlastic coated Al foil For Reflective Insulations BarrierReinforced Scrim Laminated Aluminium Foil For Insulation IndustriesCoated Pure Reflective Al foil For Reflective Insulations Industries..Foil Laminated Paper and Paper Board For Multi Colour Printing Industries.Heat insulation materialAl foil for Protective Packaging MaterialLaminated Foil for Plastic flexible laminatesSoap and detergent industriesPharmaceuticalsFoodPaper cup industriesIce CreamMulti wall paper bags industries

Product Details:

Our SunPro™ Foil Kraft ( FSK Both Side Aluminium ) insulation are mainly used as aluminium foil roof insulation, reflective foil wall insulation and also could be applied as finishes onto rock wool, glass wool etc. Our product is used as a moisture vapor barrier facing in air conditioning ductworks and cold rooms. This flexible thermal insulation sheets also service as energy insulating barrier in aid duct and HVAC system.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: As per Requirement
• Packaging Details: As per Requirement

Product Details:

Our SunPro™ Foil Kraft FSK Single Side Aluminum with PE Coating insulation are mainly used as aluminum foil roof insulation, reflective foil wall insulation and also could be applied as finishes onto rock wool, glass wool etc. Our product is used as a moisture vapor barrier facing in air conditioning ductworks and cold rooms. This flexible thermal insulation sheets also service as energy insulating barrier in aid duct and HVAC system.

Product Details:

Perforated SunPro™ Radiant Barrier Perforated radiant barrier reflects heat back at the source instead of absorbing it like traditional fiberglass insulation. As the name states, perforated radiant barrier has tiny perforations that provide breath-ability and moisture vapor to escape. The perforations in perforated radiant barrier prevent condensation buildup making perforatedx radiant barrier foil insulation a great choice for attic insulation.

Product Details:

Perforated SunPro™ Radiant Barrier Perforated radiant barrier reflects heat back at the source instead of absorbing it like traditional fiberglass insulation. As the name states, perforated radiant barrier has tiny perforations that provide breath-ability and moisture vapor to escape. The perforations in perforated radiant barrier prevent condensation buildup making perforatedx radiant barrier foil insulation a great choice for attic insulation.

Product Details:

Heat Reflective Thermal Insulation Materials like SunPro™ ANWA are Reflects most of radiation heat (blocks 97% of radiation heat)

Heat Reflective Thermal Insulation Materials Apply Nonwoven fabric which is a fabric-like material made from long fibbers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminium foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is light weight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant

Product Details:

It is light in weight but excellent tear-resistance & good puncture resistance. It is easy to handle during construction. It is used widely to make car cap to reflective sunshine & in roof,floor,wall,pack food for heat retaining. This combination provides excellent water vapour resistance and higher tensile strength.
Characteristics:Perfect uniformity,test on line in process. High barrierThe material provides excellent insulation: reflects up to 97% of radiant energy in addition to reflective sheeting resisting other types of heat transfer from conduction,convection,and radiation.The side of metalized PET forms an effective barrier against moisture,air currents and vapors.
Clean, thin and light weightOutstanding safety and enviromentally friendlyEasy to install,high efficiencyCost effective and versatile

Product Details:

MET-PET-PE Aluminium Roll ExporterMetalized film  Aluminium Foil Laminated Non-Woven Fabrics 

 

Feature:

It is light in weight, excellent tear-resistance &good puncture resistance & excellent water vapour resistance and higher tensile strength. It is easy to handle during construction. antiaging, peel strength, and printable

 

Insulation Usage:

It is used widely to make car cap to Reflective Sunshine &in Roof, floor, wall, pack food for heat retaining, medical & sanitary, industry & agriculture, construction & daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles, medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

 

Other Packaging Usage:

Metalized film for metallic yarn, glitter powder,sequin,spangle printing and lamination, coated colours metallised polyester film is for the metallic yarn, glitter powder,sequin,flxible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging and tobacco and liquor packaging.

Product Details:

Optimizing the latest technology, we manufacture a range of paper / PE / metpet laminates that are used in various industries for packaging purposes. These laminates provide a high durability to the products and also add elegance owing to their attractive color combinations. We offer these an various thickness and sizes as well as the required needs of the clients.
We manufacture and export a wide variety of metalized poly with paper which can be used for flexible laminates and wrapping of various products in soap and detergent industry. Our range is laminated with the highest quality and consistency that provides barrier protection against ultra violet lighting and moisture. Further, these can also be customized as per the clients' needs and are available at industry leading prices.

Product Details:

Fibreglass Laminated Aluminium Materials like Light Weight Fibreglass Mesh Backed Foil Insulation Finish is Reflects most of radiation heat (blocks 97% of radiation heat)

Fibreglass Laminated Aluminium Materials Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminium foil or film as outer side, this foil mesh insulation jacketing PATELS POLY PACK offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.