Scrim Laminated Aluminum Foil Film

Product Details:

Fibreglass Mesh Laminated Film Foil:

• Like Light Weight Fiberglass Mesh Backed Foil Insulation Finish is Reflects most of radiation heat (blocks 97% of radiation heat)
• Fibreglass Mesh Laminated Metalized Film
• Take light weight glass fibrous mesh (only 31gto 300 g) as backing and reflective aluminum foil or film as outer side, this foil mesh insulation jacketing PATIDAR offer usually be installed for pipe insulation in automobile and so does to wall and roof insulation.
• Alumimun Foil coated fiberglass cloth non-breath ability, Insulation good hermetic and weather resistance.
• By applying uniquely advanced compound processing and using fibreglass as the base cloth and special fire-resistant adhesive agent, our product has the excellent properties such as the smooth surface on the aluminium foil, strong light reflection, good stretching resistance in length and breadth, non-breath ability, non-breath ability, non-water permeability, good hermetic and weather resistance.

Features:

• Fibreglass Mesh Laminated Metalized Filmare97% reflecting rate, could reflect most solar energy effectively and barrier radiant effectively; light weight will not add more burden to carrier; meanwhile fantastic durable because of glass fiber mesh is strong enough; will not corrupt by moisture because of 100% Inorganic raw materials was taken to produce it; pliable and tough flexible easy to be installed from any angle.

Fibreglass Scrim Laminated Film Foil Types:

• Metalized PET ( MBOPP) Fibreglass Mesh ( Fabric ) Metalized PET.
• Metalized PET ( MBOPP) PE Fibreglass Mesh ( Fabric )
• Metalized PET ( MBOPP) PE Fibreglass Mesh ( Fabric ) PE

Application:

• Reinforced Lamination For Air Bubble Insulation Materials Manufacturing
• Reinforced Lamination For Foam Based Insulations Materials Manufacturing
• Reinforced Lamination For any Type of Thermal Insulations Materials Manufacturing
• Reinforced Lamination For Glass Wool Based Insulations Materials Manufacturing

Product Details:

SunPro MFPETMETPET + MESH /SCREEN + CLEAR PET Construction.

3 layer composite material made from UV & FR reinforced Fiber Glass Dimond Scrim with ONE side highly reflective Metalized Polyester Film and other side is clear PET film.

Specification:

• 12 Mic Metpet - Insulation Grade
• 12 Mic Clear Pet Film
• 9 Gsm Dimond Shape Fiber Glass Scrim Rainforcement

Typical Physical Property:

Our SunPro MFPETMETPETScrim insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

• Eco-friendly, environment friendly and radiant barrier.
• Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer Which improves the performance of the insulating material.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low cost.
• Never use chemical bonding materials.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• Tolerance: Weight and Thickness: ±10%; Width: ±2mm; Length: ±0.5%.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application before actually put it to use.

Product Details:

SunPro MFPEMETPET + MESH /SCREEN + PE Construction.

4 layer co-extruded composite material made from FR reinforced Fiber Glass DimondScrim withOne side highly reflective Metalized Polyester Film& Other Side PE Coating.

Specification:

• 12 Mic Metpet - Insulation Grade
• PE Film
• 9 Gsm Dimond Shape Fiber Glass Scrim Rainforcement

Typical Physical Property:

Our SunPro MFPEMETPET PE Scrim insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

• Eco-friendly, environment friendly and radiant barrier.
• Reflective Metpet Film stops up to 97% of radiant heat transfer    Which improves the performance of the insulating material.
• Lightweight and easy handling and low cost.
• Never use chemical bonding materials.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application   before actually put it to use.

Product Details:

Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however, and radiant barriers do not necessarily protect against heat transfer via conduction or convection.


Woven Scrim Laminated Film Types:

• Metalized PET with PE woven fabric
• MBOPP with PE woven fabric
• Al Foil with PE woven fabric

Usage:

• Reinforced ⁄ Lamination For Air Bubble Insulation Materials Manufacturing
• Reinforced ⁄ Lamination For Foam Based Insulations Materials Manufacturing
• Reinforced ⁄ Lamination For any Type of Thermal Insulations Materials Manufacturing
• Reinforced ⁄ Lamination For Glass Wool Based Insulations Materials Manufacturing
• For Manufacturing Insulation⁄Barrier Bags

Specifications:

Product Details:

SunPro AFPEAL + MESH /SCREEN + PE Construction.

4 layer co- extruded composite material made from FR reinforced Fiber Glass DimondScrim withOne side highly reflective Al foil& Other Side PE Coating.

Specification:

• 9mic Al Foil - Insulation Grade
• 9 Gsm Dimond Shape Fiber Glass Scrim Rainforcement
• PE Film

Typical Physical Property:

Our SunPro AFPE Aluminium PE Scrim insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

• Eco-friendly, environment friendly and radiant barrier.
• Reflective Metpet Film stops up to 97% of radiant heat transfer Which improves the performance of the insulating material.
• Lightweight and easy handling and low cost.
• Never use chemical bonding materials.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application before actually put it to use.

Product Details:

SunPro LDMESHLDPE FILM + MESH /SCREEN Construction

3 to 5 layer co- extruded composite material made from Fiber Glass reinforced with Polyethylene Film.

Typical Physical Property:

Product Benefits:

• Eco-friendly, environment friendly and Vapour barrier .
• Lightweight and easy handling and low cost waterproof type.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• Tolerance : Weight and Thickness : ±10%; Width : ±2mm; Length : ±0.5%.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application before actually put it to use.

Product Details:

SunPro MFMMETPET + MESH/SCREEN + METPET Construction.

4 to 5 layer co- extruded composite material made from UV & FR reinforced Fiber Glass Dimond Scrim with both side highly reflective Metalized Polyester Film.

Specification:

• 8 Mic Metpet - Insulation Grade
• PE Film
• 9 Gsm Dimond Shape Fiber Glass Scrim Rainforcement
• Pe Film
• 8 Mic Metpet - Insulation Grade

Typical Physical Property:

Our SunPro MFM METPET PE Scrim insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits:

• Eco-friendly, environment friendly and radiant barrier.
• Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer    Which improves the performance of the insulating material.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low cost.
• Never use chemical bonding materials.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Remarks:

• Above data are typical results and not the guaranteed performance.
• The products should be stored at room temperature away from wet and heat source.
• Please do trial-application and make sure the product can serve the specific application before actually put it to use.